Journal article
Effect of grain orientation on the compressive response of highly oriented MAX phase Ti3SiC2
Materials science & engineering. A, Structural materials : properties, microstructure and processing, v 809, 140869
30 Mar 2021
Abstract
The MAX phases comprise of a group of layered ternary carbides that exhibit unique mechanical properties which bridge the gap between their metal and ceramic constituents. To study the effects of the global grain orientation, Ti, Si and TiC powders were hot pressed to synthesize highly oriented bulk Ti3SiC2. X-ray diffraction (XRD) was used to verify the grain orientation and a Lotgering factor of 0.87 with respect to the c-axis was obtained. Prepared Ti3SiC2 samples have been compressed in two orientations, loading along the c-axis (∥c-axis) and perpendicular to the c-axis (⊥c-axis) at 10−3s−1 using a standard load frame and at 102s−1 using a Kolsky (split-Hopkinson) bar. The average compressive strength along the ⊥c-axis orientation was 761 MPa under quasi-static conditions and 987 MPa under dynamic loading, exhibiting a 30% increase on average. The ∥c-axis orientation exhibited no rate dependence in compressive strength; however both orientations exhibited an increase of strain at failure under dynamic conditions by over 0.5%, on average. The orientation-dependent failure behavior at different strain rates were examined using high-speed imaging and 2D digital image correlation (DIC) during loading and via scanning electron microscopy (SEM) post-mortem. Results indicate that the ⊥c-axis fracture surface exhibited a mixture of transgranular and intergranular cracks, kink bands and delaminations, whereas ∥c-axis was limited to a combination of intergranular and transgranular cracks. Such fracture distinctions due to the availability (or lack thereof) for kink band formation appear to be responsible for the anisotropic compressive behavior.
Metrics
Details
- Title
- Effect of grain orientation on the compressive response of highly oriented MAX phase Ti3SiC2
- Creators
- Xingyuan Zhao - Colorado School of MinesMaxim Sokol - Drexel UniversityMichel W. Barsoum - Drexel UniversityLeslie Lamberson - Colorado School of Mines
- Publication Details
- Materials science & engineering. A, Structural materials : properties, microstructure and processing, v 809, 140869
- Publisher
- Elsevier
- Resource Type
- Journal article
- Language
- English
- Academic Unit
- Materials Science and Engineering
- Web of Science ID
- WOS:000665076400002
- Scopus ID
- 2-s2.0-85102085647
- Other Identifier
- 991019168998904721
InCites Highlights
Data related to this publication, from InCites Benchmarking & Analytics tool:
- Collaboration types
- Domestic collaboration
- Web of Science research areas
- Materials Science, Multidisciplinary
- Metallurgy & Metallurgical Engineering
- Nanoscience & Nanotechnology