Journal article
Electron-backscattered diffraction and transmission electron microscopy study of post-creep Ti3SiC2
Journal of alloys and compounds, v 488(1)
20 Nov 2009
Abstract
The post-creep microstructures of coarse-grained (100-200 mu m) and fine-grained (3-5 mu m)Ti3SiC2 samples - both loaded in air at 1000 degrees C, under a tensile stress of 80MPa were studied by electron backscatter diffraction. EBSD, and transmission electron microscope, TEM. The CG sample ruptured after approximate to 100 h, with a strain to failure of approximate to 2.5% that was mostly concentrated near the fracture plane. Analysis of more than 35 grains in the undeformed grip area indicated that the maximum misorientation, MO, angle within each grain was <2 degrees. In the deformed area, roughly 1.2 mm below the fracture surface, the MO's - again within each grain - varied dramatically; in some grains, MO's of the order of 10 degrees in narrow spatial range - attributed to kink boundaries - were observed; in others, the MO was <2 degrees, i.e. they were un-deformed. Further analysis of the grains with large MO's revealed two types of deformed grains. Ones in which the kink boundaries - responsible for the MO - alternated in angle, or sign, forming a herring-bone like structure. and others in which they were all in same direction, causing bending of the basal planes. The latter deformation mechanism was confirmed by TEM. The TEM, on both fine and coarse-grained samples revealed the presence of dislocation arrays, low angle grain boundaries, as well as triple point cavities. (C) 2009 Elsevier B.V. All rights reserved.
Metrics
Details
- Title
- Electron-backscattered diffraction and transmission electron microscopy study of post-creep Ti3SiC2
- Creators
- F. Barcelo - CEA/DEN - Section for Applied Metallurgy Research 91191 Gif Sur Yvette, FranceS. Doriot - CEA/DEN - Section for Applied Metallurgy Research 91191 Gif Sur Yvette, FranceT. Cozzika - CEA/DEN - Section for Applied Metallurgy Research 91191 Gif Sur Yvette, FranceM. Le Flem - CEA/DEN - Section for Applied Metallurgy Research 91191 Gif Sur Yvette, FranceJ. L. Bechade - CEA/DEN - Section for Applied Metallurgy Research 91191 Gif Sur Yvette, FranceM. Radovic - Texas A&M UniversityM. W. Barsoum - Drexel University
- Publication Details
- Journal of alloys and compounds, v 488(1)
- Publisher
- Elsevier
- Number of pages
- 9
- Resource Type
- Journal article
- Language
- English
- Academic Unit
- Materials Science and Engineering
- Web of Science ID
- WOS:000273709600043
- Scopus ID
- 2-s2.0-70449521089
- Other Identifier
- 991019168296304721
InCites Highlights
Data related to this publication, from InCites Benchmarking & Analytics tool:
- Collaboration types
- Domestic collaboration
- International collaboration
- Web of Science research areas
- Chemistry, Physical
- Materials Science, Multidisciplinary
- Metallurgy & Metallurgical Engineering