Journal article
Impact of Premise Plumbing Design, Velocity, and Operational Factors on Microbial Activity During Stagnation in Pipes
AWWA water science, v 7(4), e70031
Jul 2025
Featured in Collection : UN Sustainable Development Goals @ Drexel
Abstract
Water systems using chloramine as a disinfectant are vulnerable to nitrification, which can degrade water quality by enhancing the loss of residual disinfectant, lowering pH, and providing substrates for the growth of heterotrophs, leading to a more active biofilm that may support opportunistic pathogen growth in the premise plumbing (i.e., piping within a building). This study examined the influence of a variety of domestic plumbing factors, specifically: use frequency (pipes used once per week vs. five times per week), pipe material (copper vs. CPVC vs. PEX‐b), pipe diameter (3/8″ vs. 1/2″ vs. 3/4″), and flow rates (0.2 gal/min vs. 3.2–3.7 gal/min), on indicators of water quality and nitrification, specifically: residual disinfectant, ammonia, nitrite, nitrate, turbidity, pH, and adenosine triphosphate (ATP, a non‐specific proxy for biological activity). Experiments were conducted on a set of 28 pipes connected to a chloraminated public drinking water supply. Fourteen of the pipes were operated at fast flow rates of 3.2–3.7 gal per minute (12.4–13.9 L/min), which corresponded to 2.7, 5.7, and 9.5 ft/s (0.81, 1.7, 2.9 m/s) for the 3/4, 1/2, and 3/8 in. pipes, respectively. The remaining 14 pipes were operated at slow flow rates of 0.2 gal per minute (0.8 L/min), which corresponds to 0.15, 0.36, and 0.56 ft/s (0.045, 0.11, and 0.17 m/s) for the 3/4 in. (19 mm), 1/2 in. (13 mm), and 3/8 in. pipes (9.5 mm), respectively. Faster velocity flows were associated with higher residual disinfectant, less degradation of ammonia, lower turbidity and lower ATP. These results suggest that the faster flow velocity altered the biofilm and reduced the amount of microbial activity and nitrification occurring. Differences were particularly strong in the 3/8 in. (9.5 mm) pipes, suggesting that a velocity of 9.5 ft/s (2.9 m/s) offered additional benefits in biofilm control, beyond those achieved at the velocities of 2.7 ft/s (0.81 m/s) and 5.7 ft/s (1.7 m/s) in 3/4 in. (19 mm) and 1/2 in. (13 mm) pipes, respectively. Pipes flushed once per week tended to reach a similar end state of loss of residual and progression of nitrification, with limited differences due to velocity, pipe material, or diameter. Better understanding of the conditions that are associated with nitrification offers the potential to better control nitrification. This in turn may help maintain residual disinfectant as a protection against harmful microorganisms in drinking water.
This study assesses the impact of plumbing design and operational factors on water quality. Understanding these factors supports efforts to maintain high water quality in premise plumbing pipes.
Metrics
2 Record Views
Details
- Title
- Impact of Premise Plumbing Design, Velocity, and Operational Factors on Microbial Activity During Stagnation in Pipes
- Creators
- Patrick L. Gurian (Corresponding Author) - Drexel UniversityShahzaib Samuel - Drexel UniversityNeha Yadav - Drexel UniversityMichael Krieger - Drexel UniversityRajveer Singh - Drexel UniversityTim Bartrand - ESPRI Philadelphia Pennsylvania USA
- Publication Details
- AWWA water science, v 7(4), e70031
- Publisher
- Wiley
- Number of pages
- 17
- Grant note
- Plastic Pipe and Fittings Association (PPFA)Drexel University's STAR program
This work was supported by funding from the Plastic Pipe and Fittings Association (PPFA). Michael Krieger's participation was supported in part by Drexel University's STAR program. PPFA associates Jeff Church, Richard Church, Mike Cudahy, and Richard Houle contributed to the experimental design, data analysis, and interpretation of results. Reviewers from PPFA provided valuable comments on a draft of this report. Hrushikesh Deshpande assisted with the construction of the pipe racks and initial data collection.
- Resource Type
- Journal article
- Language
- English
- Academic Unit
- Civil, Architectural, and Environmental Engineering
- Web of Science ID
- WOS:001545161900001
- Scopus ID
- 2-s2.0-105012766788
- Other Identifier
- 991022078900204721
UN Sustainable Development Goals (SDGs)
This publication has contributed to the advancement of the following goals:
InCites Highlights
Data related to this publication, from InCites Benchmarking & Analytics tool:
- Web of Science research areas
- Water Resources