Files and links (1)
Published, Version of Record (VoR)Open Access (License Unspecified), Open
Journal article
Modeling the evolution of anisotropy in Al–Li alloys: application to Al–Li 2090-T8E41
International journal of plasticity, v 18(10), pp 1373-1393
2002
Abstract
It is widely reported in current literature that the precipitation hardened Al–Li sheet alloys exhibit extremely high anisotropy in yield (and ultimate tensile) strength, which is well beyond what can be explained as purely a consequence of the strong crystallographic texture in the material (e.g. J. Mater. Sci. Eng. A265, 1999, 100). This paper presents a crystal plasticity based modeling framework that will (i) facilitate the segregation of the contributions to the overall anisotropy from crystallographic texture and precipitation hardening, and (ii) correlate the contribution from precipitate hardening to either co-planar slip activity or the non-coplanar slip activity in the cold-working step prior to the aging heat treatment. More specifically, a Taylor-type (fully-constrained) crystal plasticity model was formulated to predict the yield strength of the fully processed sheet and its anisotropy, while accounting for the initial texture in the hot-worked sheet, its evolution during the cold-working step prior to aging, and the inhomogeneous nucleation of the T
1 phase platelets (these are known to form on {111} planes, but not usually in equal amounts on the different {111} planes in a given crystal). In an effort to illustrate the methodology developed in the study, a limited set of experiments was conducted on Al–Li 2090-T8E41 alloy sheet. Off-axis stretches were applied on the sheet at room temperature prior to the aging treatment, and the mechanical anisotropy in the fully processed sheets was characterized by performing tension tests on coupons cut from the sheet at 0, 30, 45, 60 and 90° to the original rolling direction (RD). Both the initial texture in the sheet and its evolution during the different off-axis stretches were characterized. The alloys processed in this study showed pronounced anisotropy. The application of the methodology developed in this study revealed that much of the observed anisotropy in this particular data set could be explained by accounting for the texture in the sample in the processed condition. Although the data set available was inadequate to establish clear correlations of the anisotropy with preferential hardening mechanisms arising from either co-planar or non-co-planar slip activity during the off-axis stretch, there were indications favoring the latter. This case study, however, illustrates the application of the methodology developed in this study to obtain better insight into the nature of the anisotropy in these sheets and its physical origin.
Metrics
Details
- Title
- Modeling the evolution of anisotropy in Al–Li alloys: application to Al–Li 2090-T8E41
- Creators
- H. Garmestani - Florida A&M University - Florida State University College of EngineeringS.R. Kalidindi - Drexel UniversityL. Williams - Florida A&M University - Florida State University College of EngineeringC.M. Bacaltchuk - Florida A&M University - Florida State University College of EngineeringC. Fountain - Florida A&M University - Florida State University College of EngineeringE.W. Lee - Naval Air Systems CommandO.S. Es-Said - Loyola Marymount University
- Publication Details
- International journal of plasticity, v 18(10), pp 1373-1393
- Publisher
- Elsevier
- Resource Type
- Journal article
- Language
- English
- Academic Unit
- Metallurgical/Materials Engineering [Historical]
- Web of Science ID
- WOS:000178164600005
- Scopus ID
- 2-s2.0-0035995237
- Other Identifier
- 991019168421704721
InCites Highlights
Data related to this publication, from InCites Benchmarking & Analytics tool:
- Collaboration types
- Domestic collaboration
- Web of Science research areas
- Engineering, Mechanical
- Materials Science, Multidisciplinary
- Mechanics