Logo image
Sensitivity of ultrasonic hydrophone probes below 1 MHz
Journal article   Peer reviewed

Sensitivity of ultrasonic hydrophone probes below 1 MHz

P.A Lewin, G Lypacewicz, R Bautista and V Devaraju
Ultrasonics, v 38(1)
Mar 2000
PMID: 10829645

Abstract

Composite transducers Piezoelectric PVDF polymer ultrasound hydrophones
Frequency responses of different PVDF polymer hydrophone probes, including membrane and needle designs, were measured and are presented in terms of end-of-cable voltage sensitivity versus frequency over a wide, 4.5 octave bandwidth ranging from 0.25 to 2.5 MHz. The probes are seldom, if at all, characterized in this frequency range due to the difficulties associated with a lack of adequate and readily implementable calibration techniques. To this end, a technique, which uses a combination of swept frequency chirp and reciprocity, so that both the relative and absolute plots of sensitivity versus frequency can be obtained, was developed and tested. Salient features of the technique including the design of a 6 octave auxiliary acoustic source are described. The experimental data indicate that a majority of the PVDF membrane hydrophones exhibit a relatively uniform (to within ±2 dB) response. While, in general, this is not the case for commercially available needle hydrophone probes, it is evidenced that a careful attention to the PVDF probe design results in frequency characteristics fairly close to those achievable with a membrane design. The overall uncertainty of the calibration technique was estimated to be better than ±1.5 dB in the considered frequency range. The results of this work are important to implement procedures for adequate determination of the Mechanical Index (MI) of ultrasound imaging devices. MI is widely accepted as a predictor of potential bioeffects associated with cavitation phenomena. Current efforts are focused on extending the applicability of the technique to frequencies below 100 kHz.

Metrics

11 Record Views
17 citations in Scopus

Details

UN Sustainable Development Goals (SDGs)

This publication has contributed to the advancement of the following goals:

#3 Good Health and Well-Being

InCites Highlights

Data related to this publication, from InCites Benchmarking & Analytics tool:

Collaboration types
Domestic collaboration
International collaboration
Web of Science research areas
Acoustics
Radiology, Nuclear Medicine & Medical Imaging
Logo image