Logo image
Back
Stabilization of Tunnel Manganese Oxide Electrodes in Li-Ion and Na-Ion Batteries
Journal article

Stabilization of Tunnel Manganese Oxide Electrodes in Li-Ion and Na-Ion Batteries

Bryan Byles and Ekaterina Pomerantseva
Meeting abstracts (Electrochemical Society), v MA2018-01(44), pp 2581-2581
13 Apr 2018
DOI: https://doi.org/10.1149/MA2018-01/44/2581

Abstract

Tunnel structured manganese oxides, built from corner and edge sharing MnO 6 octahedra arranged around stabilizing cations and water molecules, are of significant interest for energy storage applications such as Li-ion and Na-ion batteries (LIBs and SIBs, respectively) due to their low cost, environmental friendliness, and high electrochemical activity. Moreover, the structural tunnels in these materials act as 1D diffusion channels and provide crystallographic sites for ion insertion. However, tunnel manganese oxide phases face challenges in regards to long term cycling stability in intercalation-based batteries, which has been attributed to structural instabilities resulting from Jahn-Teller distortions induced by manganese reduction [1, 2]. Therefore, it is imperative to stabilize the structure of tunnel manganese oxides for improved electrochemical stability as cathode materials in intercalation-based batteries. Here, we demonstrate stabilization of a newly reported tunnel manganese oxide phase, 2xn-MnO 2 , with the crystal structure consisting of 2x2, 2x3, and 2x4 octahedra tunnels containing Na + stabilizing cations and water molecules. Building off of previous work by C.S. Johnson et al. [3], where the smaller tunnel structured α-MnO 2 was stabilized with Li 2 O, we modified the structure and chemical composition of 2xn-MnO 2 via mixing in methanol and lithium hydroxide, resulting in insertion of Li 2 O into the structural tunnels of 2xn-MnO 2 . In LIBs, the Li 2 O-stabilized 2xn-MnO 2 demonstrates both higher initial capacity and superior capacity retention after 100 cycles. The initial capacity is improved from 93 mAh g -1 for the pristine material to 168 mAh g -1 for the stabilized 2xn-MnO 2 . Moreover, the galvanostatic discharge-charge profile for the stabilized 2xn-MnO 2 exhibits a better pronounced plateau-shaped region compared to the original 2xn-MnO 2 phase, indicating that the stabilized material contains more well-defined insertion sites. Similarly, in SIBs, the capacity of the stabilized 2xn-MnO 2 was improved by 35% to 81 mAh g -1 , and capacity retention increased from 43% to 75% after 100 cycles, demonstrating the effectiveness of this stabilization approach in both Li-ion and Na-ion battery systems. Thus, we show that stabilization with Li 2 O can be applied to various tunnel manganese oxide phase to improve their electrochemical performance as intercalation-based battery electrodes. References Y. Yuan et al., Nano Energy (2016) 19 , 382 A. Tompsett and M.S. Islam, Chem. Mater. (2013) 25 , 2515 S. Johnson et al., J. of Power Sources (1997) 68 , 570

Metrics

6 Record Views

Details

Logo image