Journal article
Transmission kossel study of the structure of compressed iron and its recrystallization behaviour
Acta metallurgica, v 26(1), pp 61-80
1978
Abstract
High purity, coarse-grained iron deformed 40% by compression was examined by the transmission Kossel diffraction (TK) technique in both the as-deformed and the partially recrystallized states. It was found that many of the deformed grains were split into differently oriented regions (
matrix bands) with thin, sharply misoriented.
deformation bands between the different matrix bands. The local misorientations across the deformation bands were as high as 50° in some cases, though usually less than this. The type of deformation banding seen was in many cases similar to that predicted by Dillamore and his associates with different regions of the same grain seeking the two alternative stable end orientations— 〈100〉 or 〈111〉. Deformation banding was also associated with the unstable initial orientations 〈110〉. Nucleation of new grains was found to occur almost entirely at deformation bands. In almost all cases, each new grain had an orientation of one of the identified orientations in the matrix or deformation bands. There was a higher rate of nucleation in compressed iron than in similar iron rolled to the same reduction in thickness.
On a étudié par diffraction de Kossel en transmission um fer de grande pureté à gros grains, déformé de 40% en compression, dans 1' état brut de déformation et après recristallisation partielle. De nombreux grains déformés étaient divisés en régions d'orientations différentes (bandes de
matrice), avec de fines bandes de
déformation légèrement désorientées situées entre les bandes de matrice différentes. La désorientation locale dans les bandes de déformation pouvait atteindre dans certains cas 50 degrés, bien qu'elle soit généralement plus faible. Le type des bandes de déformation que nous observées était très souvent semblable à celui qu'avaient prévu Dillamore et coll., différentes régions d'un même grain tendant vers les deux orientations finales stables possibles, 〈100〉 ou 〈111〉. La formation de bandes de déformation était également associée avec les orientations initiales instables 〈110〉. La germination des nouveaux grains se produisait presque iniquement sur les bandes de déformation. Dans la plupart des cas, chaque nouveau grain présentiat l'une des orientations identifiées dans la matrice ou dans les bandes de déformation. La vitesse de germination était plus élevée dans le fer en compression que dans le même fer laminé de manière à produire la même diminution d'épaisseur.
Hochreines, grobkörniges Eisen, welches im Druck 40% verformt war, wurde sowohl im verformten als auch im teilrekristallisierten Zustand mittels der Technik der Kosseibeugung in Durchstrahlung untersucht. Es wurde gefunden, daβ viele der verformten Körner in verschieden orientierte Bereiche (Matrixbänder) mit dünnen, deutlich fehlorientierten Deformationsbändern zwischen den verschiedenen Matrixbändern aufgespalten sind. Die örtlichen Fehlorientierungen über die Deformationsbänder hinweg betrugen in manchen Fällen 50°, üblicherweise jedoch weniger. Der beobachtete Typ der Deformationsbandbildung ähnelte in vielen Fällen dem von Dillamore und Mitarbeitern vorausgesagten, bei dem verschiedene Gebiete desselben Kornes die beiden alternativen stabilen Endorientierungen anstreben, 〈100〉 oder 〈111〉. Deformationsbandbildung war auch verbunden mit den unstabilen Ausgangsorientierungen 〈110〉. Die Bildung neuer Körner wurde nahezu ausschlieβlich an den Deformationsbändern beobachtet. In nahezu allen Fällen besaβ das neue Korn eine Orientierung, die in der Matrix oder in den Deformationsbändern gefunden worden war. Im druckverformten Eisen war die Keimbildungsrate höher als in vergleichbarem Eisen, das zu gleicher Dickenreduktion gewalzt war.
Metrics
Details
- Title
- Transmission kossel study of the structure of compressed iron and its recrystallization behaviour
- Creators
- Y. Inokuti - University of SussexR.D. Doherty - University of Sussex
- Publication Details
- Acta metallurgica, v 26(1), pp 61-80
- Publisher
- Elsevier
- Resource Type
- Journal article
- Language
- English
- Academic Unit
- [Retired Faculty]; Materials Science and Engineering
- Web of Science ID
- WOS:A1978EH00900006
- Scopus ID
- 2-s2.0-0017907243
- Other Identifier
- 991021890006904721