Logo image
Back
Nonlinear finite element modeling of reinforced masonry shear walls for bidirectional loading response
Journal article   Peer reviewed

Nonlinear finite element modeling of reinforced masonry shear walls for bidirectional loading response

Ehsan Minaie, Franklin L. Moon and Ahmad A. Hamid
Finite elements in analysis and design, v 84, pp 44-53
Jul 2014
DOI: https://doi.org/10.1016/j.finel.2014.02.001
Featured in Collection :   UN Sustainable Development Goals @ Drexel

Abstract

Bidirectional Finite element Masonry Nonlinear analysis Parametric study Shear wall
The objective of this paper is to analytically establish the effects of bidirectional loading on the response of reinforced masonry shear walls. To accomplish this, an efficient nonlinear 3D finite element modeling approach was used and proved capable of simulating the capacity (within 10%), failure modes and hysteretic response of both partially-grouted (PG) and fully-grouted (FG) masonry shear walls. This modeling approach was also validated for the prediction of out-of-plane response, and then used to examine the influence of bi-directional loading through a series of parametric studies with out-of-plane drift, wall aspect ratio and vertical stress as variables. Results from this study indicate that out-of-plane drifts corresponding to the collapse prevention limit state reduce the in-plane capacity of PG walls by more than 20%. Further, this study indicates that the sensitivity to out-of-plane drift is increased as the aspect ratio increases and as the vertical stress decreases. Although the capacity of PG walls is influenced by out-of-plane drifts, their hysteretic responses, and in particular, energy dissipation capacities as well as their ductility remain nearly unchanged. As a result, the seismic response of PG masonry walls is likely nominally affected by bi-directional ground motions. •We used nonlinear finite element approach to model the bidirectional behavior of reinforced masonry.•3D finite element models were used for this purpose for the first time.•The finite element models were correlated with the experimental results.•Out-of-plane drifts reduce the in-plane capacity of masonry shear walls.•This is not addressed by any of the existing masonry design codes.

Metrics

12 Record Views
31 citations in Web of Science
32 citations in Scopus

Details

UN Sustainable Development Goals (SDGs)

This publication has contributed to the advancement of the following goals:

#11 Sustainable Cities and Communities

InCites Highlights

Data related to this publication, from InCites Benchmarking & Analytics tool:

Web of Science research areas
Mathematics, Applied
Mechanics
Logo image